Save time and money with Arlington’s liquid-tight,
concrete-tight zinc fittings for PVC jacketed MC cable.
ONE fitting FITS THREE cable sizes!
The 1/2" LTMC50 ships ready to install on #12 or #14 PVC
jacketed MC cable. For installations on #10 cable, substitute
the WHITE grommet and washer. It’s FAST and EASY!
Because they fit more than one cable size, these fittings
reduce inventory, saving you the cost of stocking several
800/233-4717 • www.aifittings.com Arlington
ZLIQUID-TIGHT • CONCRETE-TIGHT Made in USA
1_ 2 ad LTMC_1/2 pg ad LPCG 8/4/15 12:01 PM Page 1
LOW PROFILE • 4" DIAMETER
wall cavities - or obstructions
running behind the wall.
box installs FAST
in an existing
1/2" or 5/8"
wall with a
4" hole saw.
hold it firmly
Install the fixture where
YOU want it, with Arlington’s
Low Profile Sconce Box.
Patent pending Made in USA
1_4pg sconce bx_EMT 1/4 pg 9/05 7/11/14 3: 38 PM Page 1
#6 to #2 AWG copper or aluminum,
solid or stranded
#14 to #4
RELIABLE INTERSYSTEM BONDING
GB5 zinc with cover
Grounding Bridge provides
reliable intersystem bonding
between power and
Available in zinc and
bronze they handle
multiple hookups of
telephone, CATV, satellite.
• Four termination points;
more than required by the NEC
• All meet bonding requirements
of 250.94 in the 2008, 2011, 2014 NEC
• For indoor or outdoor use;
fast, simple installation
• Textured, paintable plastic cover
• Easy access for inspections
Available in bronze for large
#6 to 250 MCM conductors! NEW!
cover and screw...
bulk-packaged to lower cost
zinc 1_ 2 p Ground Bridge_1/2 pg ad LPCG 12/9/14 4: 24 PM Page 1
FBR423 UL ratings
70 lb fan
Up to 150 lb fixture
FAN/FIXTURE BOX FLUSH-WITH-THE-CEILING INSTALLATIONS
THE LOW COST BOX...WITH ADJUSTABLE STEEL BRACKET AND PLASTIC BOX
Arlington’s low cost, economical
steel fan/fixture bracket with plastic box
delivers super-secure, versatile on-center
mounting between joists spaced 16" to 24".
• Easy mounting in new construction...
fan bracket installation screws ship captive
• Bracket ends adjust for flush
installation on ceilings
up to 1-1/4" thick. They’re
pre-set for a 1/2" ceiling.
Bend along score line for
other ceiling depths.
• 23.0 cu. in. plastic box is positionable anywhere along bracket
• UL/CSA Listed
Made in USA
securely to joists
to position box
REV2 1_ 2 ad FBR423_1/2 pg ad LPCG 11/19/13 11: 20 AM Page 1
One-piece IN BOX™, the recessed electrical box for exterior use,
eliminates installing an electrical box and bubble cover
assembly, so you save big on labor and materials.
IN BOX installs in the wall –
so less shows outside.
Fewer parts to handle.
Time savings. A great-looking job.
Get it all in Arlington’s IN BOX!
• Non-metallic, 22.0 cu. in. box with
clear or white cover
• Accepts single-gang
devices; no gaskets
ONE-PIECE. SAVES TIME – LOOKS GREAT!
LOW PROFILE, EXTRA DUTY COVER
Made in USA ®
JUST FOR 1-1/2" & FOAM WALL SYSTEMS!
w white cover
wall systems, including
foam, DBVME1 has fixed,
built-in flange - eliminates
w white cover
Adjustable to fit
ANY foam board
on 2-3/4" to 5" wall, or
custom stucco finishes
from 1/4" to 2-1/2" thick.
MEETS 2014 NEC
Section 406.9 for
protection of exterior
outlets which require
the use of extra-duty
cover for all outdoor 15
or 20 AMP receptacles. CONTINUOUS INSULATION forHelp inMaintaining
1_ 2 ad HORIZ Vegas InBox.qxp_1/2 pg ad LPCG 8/5/16 5:05 PM Page 1